Valin New Energy ha logrado un gran avance en las aplicaciones fotovoltaicas en tejados con membrana con su Base Integrada Membrana-Riel desarrollada de forma independiente. Featuring the core design of “Long Rail + Wide Base” with a 500mm extended size, this product completely subverts the distribución de carga mode of traditional welded small bases, fundamentally solving the problems of insulation board collapse, sagging water accumulation and roof leakage, providing a safe and durable integrated solution for TPO/PVC fotovoltaica en tejados con membrana projects.
Innovative Design: 500mm Long Rail + Wide Base Reconstructs Load Distribution Logic
Specially designed for TPO/PVC tejado con membranas, Valin’s Base Integrada Membrana-Riel features a 500mm extended rail and wide integrated structure, realizing a revolutionary upgrade in load transmission compared with common 150mm welded small bases.
Core Design Advantages
- 500mm Ultra-long Rail: Greatly increases the contact area with the roof insulation board, effectively distributes the weight of PV modules, carga de nieve and carga de viento, ensuring linear and uniform distribución de carga and eliminating local stress concentration.
- Integrated Wide Base: Factory pre-assembled with high structural strength and no weak welding points. Fixed directly on the TPO/PVC membrane by hot-air welding without perforation, preserving the original impermeable structure.
- Extreme Weather Resistance: Excellent performance in resisting carga de nieve and wind uplift, with stable operation in typhoon-prone areas.
Industry Puntos Débiles: Defects of Traditional Welded Small Bases
The 150mm welded small bases widely used in the market have unavoidable defects:
- Severe stress concentration easily crushes roof insulation boards and causes roof sagging;
- Sagging leads to water accumulation, accelerating membrane aging and lap tearing, resulting in roof leakage;
- The on-site welding process is unstable, and the weld seam is prone to rusting and cracking, and it may fall off after long-term use;
- Uneven distribución de carga increases risks under heavy snow and typhoon conditions.
As illustrated in the figure, following the instalación of traditional welded small bases on a TPO tejado con membrana project, the roof insulation boards have collapsed under the relatively light weight load of the support racks and solar modules, resulting in water pooling and surface depressions. If this instalación method is adopted in regions with high snow distribución de carga, the weight of ice and snow accumulating on the module surfaces will easily cause excessive pressure to concentrate on the extremely small load-bearing area of the small bases. This will lead to roof subsidence and cracking at the lap joints of the roof membrane, further triggering roof leakage and ultimately rendering the roof’s impermeableing performance ineffective.
Comparison: Valin Integrated Base VS Traditional Small Base
| Items | Valin Membrane-Rail Base (500mm) | Traditional Welded Base (≈150mm) |
|---|---|---|
| Structure | 500mm long rail + wide base, large contact area | 150mm short base, small contact area |
| Load Distribution | Linear & uniform, high efficiency | Local stress concentration, easy to crush panels |
| Roof Impact | No sag, no water accumulation, protects roof structure | Prone to sagging & leakage |
| Structural Strength | Factory-integrated molding, high-strength aluminum alloy | TPO particle injection molding, with a short upper connecting guide rail, is not conducive to component position adjustment |
| Impermeable | No perforation, 100% impermeable | High leakage risk |
| Weather Adaptability | Strong typhoon & snow resistance | High risk in extreme weather |
Project Cases: Proven Performance
Valin’s Base Integrada Membrana-Riel has been successfully applied in many benchmark projects:
- SVolt Energy 35MW PV Project: Stable operation, no roof leakage or sagging.
- Shanghai Jahwa 4MW Tejado con Membrana Project: TPO roof compatible, no damage to impermeable layer.
- Hormann, Van de Velde, Vaillant and other overseas projects: Complies with European high standards and highly recognized by international clients.
- Hormann-TPO-Roof-Solar-Mounting-system
Industry Value: Setting New Safety Standards
As the first professional sistema de montaje fotovoltaico for TPO/PVC tejado con membranas in China, Valin’s Base Integrada Membrana-Riel fills the industry gap in roof safety. Its innovative “Long Rail + Wide Base” design redefines safety standards and provides a replicable solution for the global industry.
Valin New Energy will continue to focus on fotovoltaica en tejados con membrana technology, optimize product performance, and support the safe, efficient and sustainable development of commercial and industrial roof PV power stations worldwide.
